1235 aluminum foil has an aluminum content of not less than 99.35% aluminum foil. HTMM GROUP aluminum can process 1235 aluminum foil with a thickness of 0.0055-0.03mm. It is widely used in packaging because of its good anti-rust properties, formability and compatibility. food packaging,Cigarette Packaging after lamination Cable, tape, battery foil.
|Type||1235 Aluminium foil|
|Surface||One side bright,one side matt|
High plasticity and corrosion resistance
Elevctrical conductivity and thermal conductivity
Gas welding,hydrogen welding and resistance welding
Under various pressure processing and extension,bending
1.Food Preparation: Aluminum foil is “dual-ovenable” and can be used in both convection and fanassisted ovens. A popular use of foil is to cover thinner sections of poultry and meat to prevent
overcooking. The Henan HuaWei also provides recommendations on limited uses of aluminum foil in microwave ovens.
2.Insulation: Aluminum foil is 88 percent reflective and is widely used for thermal insulation, heat exchanges and cable liners. Foil-backed building insulation not only reflects heat, also
provides a protective vapor barrier.
3.Electronics: Foil in electrical capacitors provides compact storage for electric charges. If the foil surface is treated, the oxide coating works as an insulator. Aluminum foil
capacitors are commonly found in electrical equipment, including television sets and computers.
4.Geochemical Sampling: Aluminum foil is used by geochemists to protect rock samples. Foil provides a seal from organic solvents and does not taint the samples
as they are transported from the field to the lab.
5.Art and Decoration: Anodizing aluminum foil creates an oxide layer on the aluminum surface that can accept colored dyes or metallic salts. Through this technique,
aluminum is used to create inexpensive, brightly colored foils.
CC mother coil (made by casting rolling)or DC mother coil(made by hot -rolled production)
Rouging by cold rolling mill
Finishing rolling by foil mill
Cleaning and straightening by straightening machine
Annealing (dangling annealing) to charge the temper
Packaging (from the inner to the outer:plastic film,fiber carton,wooden pallet with steel strip tied),put the drier into the package to prevent damp by sea
The surface of the aluminum foil should be clean,smooth.There is no corrosion,empty,folding, brown staining,slotted,add edge,wrinkling ,concave and convex.
The surface of the aluminum foil are not allowed to have a serious color difference.
The end surface of the aluminum foil should be clean and tidy,there is no burr,wrong layer, bruising and collapsed